Meyer Sound Mina Compact ユーザーズマニュアル

36

Up to two MINA loudspeakers can be floor- or pole-
mounted with the MUB-MINA mounting yoke. For floor- and 
pole-mounted applications, the MUB-MINA can be oriented 
for either maximum downtilt (with the slot near the rear of 
the loudspeakers) or maximum uptilt (with the slot near the 
front of the loudspeakers).

■

For a single floor- or pole-mounted cabinet, the 
MUB-MINA supports continuos angles from +10 to –10 
degrees in the maximum downtilt orientation, and angles 
of 0 to +20 degrees in the maximum uptilt orientation.

■

For multiple floor- or pole-mounted cabinets, the 
MUB-MINA supports fixed angles of 0, +5, and +10 
degrees (with either orientation).

When mounting the MUB-MINA on 

a pole, make sure the pole and pole-mount 

adapter have been rated to support the full weight of 
the U-bracket and loudspeakers. Observe all safety 
precautions specified by the pole and pole-mount 
adapter manufacturer.

For illustrations showing which 

MUB-MINA mounting holes and slot configura-

tions to use to achieve specific angles, refer to the 
MG-MINA Assembly Guide (PN 05.207.101.01) avail-
able at 

.

The MCF-MINA caster frame safely supports up to five 
MINAs for transport and groundstacking, making it easy to 
assemble or disassemble arrays. The caster frame’s sturdy 
construction allows it be conveniently moved with forklifts.

For complete information on the 

MCF-MINA, as well as for other rigging acces-

sories, refer to the MG-MINA Assembly Guide 
(PN 05.207.101.01) available at 

.

The MINA at the bottom of the stack attaches securely to 
the caster frame with its GuideALinks and is secured with 
the four (1/4 by 0.90-inch) quick-release pins included with 
the caster frame. The configuration of the GuideALinks for 
the attached MINA determines its tilt, which can be from 
+6 degrees (uptilt) to –5 degrees (downtilt).

Always use the quick-release pins 

included with the MCF-MINA caster frame to 

secure groundstacked MINAs to the grid. Do not use 
the quick-release pins included with MINA in the 
frame as they are shorter and will not lock in place.