Meyer Sound Mina Compact ユーザーズマニュアル

37

The MG-MINA grid can travel installed on 

top of MINA stacks.

Durable nylon covers, sized for stacks of 3, 

4, and 5 units, are available to ensure the MINA 

is completely road ready.

■

Do not stack more than five MINAs.

■

Avoid moving stacks in the front-to-back direction of the 
MINAs (the long side); always move stacks sideways to 
avoid tipping.

■

When transporting a non-curved MINA stack with 
0-degree splay angles, configure the rear GuideALinks 
for the bottom MINA so it is attached to the caster frame 
at 0 degrees (using the 5-degree hole in the MINA 
GuideALinks).

■

When transporting a curved MINA stack with wide splay 
angles, configure the rear GuideALinks for the bottom 
MINA so it is attached to the caster frame at –5 degrees 
(using the 0-degree hole in the MINA GuideALinks), to 
compensate for the stack’s center of gravity.

■

When groundstacking MINAs with the caster frame, 
make sure that all four caster wheels are blocked to pre-
vent the stack from rolling away.