Kenwood TH-K2ET ユーザーズマニュアル
62
4 Press [MR] to store the start frequency in the
memory channel.
5 Turn the Tuning control to select your desired
end frequency.
6 Press [F], [MR] then turn the Tuning control to
select a channel from U0 ~ U2, corresponding to
the channel selected in step 4.
the channel selected in step 4.
•
For example, if you selected L0 in step 4, select U0
for the end frequency.
for the end frequency.
7 Press [MR] to store the end frequency in the
memory channel.
■
Performing Program Scan
1 Press [VFO].
2 Turn the Tuning control to select a frequency
within the frequency range of memory channel
L0/U0 ~ L2/U2.
L0/U0 ~ L2/U2.
3 Press [VFO] (1 s) to start Program Scan.
4 To stop Program Scan, press [VFO] or [PTT].
Note:
◆
If you press [MONI/SQL], Program Scan temporarily pauses.
Release [MONI/SQL] to resume scanning.
Release [MONI/SQL] to resume scanning.
◆
The transceiver stops scanning when it detects a signal.
◆
If more than 2 Program Scan channel pairs are stored and
overlaps the frequency range among the pairs, the smaller
Program Scan memory channel number has priority.
overlaps the frequency range among the pairs, the smaller
Program Scan memory channel number has priority.