Kenwood TH-K2ET ユーザーズマニュアル
63
◆
To perform Program Scan, the “L” channel must be lower
than the “U” channel. Otherwise, Band Scan starts {page
60}.
than the “U” channel. Otherwise, Band Scan starts {page
60}.
M
EMORY
S
CAN
Memory Scan monitors memory channels in which you
have stored frequencies.
have stored frequencies.
All-Channel Scan
The transceiver scans all of the memory channels in
which you have stored frequencies.
which you have stored frequencies.
1 Press [MR] (1 s).
•
Scan starts from the last memory channel number and
ascends up through the channel numbers (default).
Turn the Tuning control to change the scanning
direction.
ascends up through the channel numbers (default).
Turn the Tuning control to change the scanning
direction.
2 To stop All-Channel Scan, press [MR] or [PTT].
Note:
◆
You must have 2 or more memory channels that contain data,
excluding special function memory channels (L0/U0 ~ L2/U2, Pr,
and AL).
excluding special function memory channels (L0/U0 ~ L2/U2, Pr,
and AL).
◆
You can perform All-Channel Scan in Channel Display Mode
{page 57}.
{page 57}.