JVC RX-E100SL ユーザーズマニュアル

You can compress the dynamic range (difference between maximum
sound and minimum sound) of the reproduced sound. This is useful
when enjoying surround sound at night.
• This function takes effect only when playing back a source using

Dolby Digital.

Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.

The CONTROL buttons now work for basic
settings.

∞ (or 5) repeatedly until

*

* “MID” is the initial setting. If you have already changed the

setting, another setting will be shown.

3 (or 2) to select the

• Each time you press the button, the compression level changes

as follows:

: Select this when you want to enjoy surround with its

full dynamic range. (No effect applied.)

: Select this when you want to reduce the dynamic range

a little.

: Select this when you want to apply the compression

effect fully. (Useful at night.)

If the bass sound is distorted while playing back software using
Dolby Digital or DTS Digital Surround, follow the procedure below.
• This function takes effect only when the subwoofer (LFE) signals

come in, (with “SUBWFR” set to “YES”).

Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.

The CONTROL buttons now work for basic
settings.

∞ (or 5) repeatedly until “LFE

*

* “0” is the initial setting. If you have already changed the

setting, “–10dB” will be shown.

3 (or 2) to select the LFE

• Each time you press the button, the LFE attenuator level

changes as follows:

: Normally select this.

: Select this when the bass sound is distorted.

EN08-16.RX-E100SL[J]_f

01.3.7, 2:49 PM

15