JVC RX-E100SL ユーザーズマニュアル
19
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
Adjusting the Tone
You can adjust the bass and treble sounds as you like.
• You have to make these adjustments for each source.
• You have to make these adjustments for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST.
The CONTROL buttons now work for sound
adjustments.
adjustments.
2
Press CONTROL
∞ (or 5) repeatedly until
“BASS” or “TREBLE” (with the current
setting)
setting)
*
appears.
BASS
: To adjust the bass.
TREBLE
: To adjust the treble.
* “0” is the initial setting. If you have already changed the
setting, another number (level) will be shown.
3
Press CONTROL
3 or 2 to adjust the sound
level.
• Pressing CONTROL
3 increases the sound level by +2 steps
(from –10 to +10).
• Pressing CONTROL
2 decreases the sound level by –2 steps
(from +10 to –10).
4
Repeat steps
2
and
3
to adjust the other sound
level.
Sound Adjustments
ADJUST
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
Ex.: When adjusting the bass level
Remote
NOT
Adjusting the Subwoofer Output Level
You can adjust the subwoofer output level if you have connected a
subwoofer and set the subwoofer information correctly – “YES.”
• You have to make this adjustment for each source.
subwoofer and set the subwoofer information correctly – “YES.”
• You have to make this adjustment for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST.
The CONTROL buttons now work for sound
adjustments.
adjustments.
2
Press CONTROL
∞ (or 5) repeatedly until
“SUBWFR (subwoofer)” (with the current
setting)
setting)
*
appears.
* “0” is the initial setting. If you have already changed the
setting, another number (level) will be shown.
3
Press CONTROL
3 or 2 to adjust the sound
output level.
• Pressing CONTROL
3 increases the sound output level
(from –10 to +10).
• Pressing CONTROL
2 decreases the sound output level
(from +10 to –10).
When using the remote control
1 Press SOUND.
10 keys now work for sound adjustments.
2 Press SUBWOOFER +/– to adjust the sound output level
(from –10 to +10).
ADJUST
CONTROL
CONTROL
CONTROL
OGIC
VOL
AUTO
ATT
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
CONTROL
EN17-19.RX-E100SL[J]_f
01.3.7, 2:50 PM
19