JVC RX-E100SL ユーザーズマニュアル

You can also use the remote control for some tuner operations.
• When using the remote control, see also “Mastering Remote Operations” on page 32.

The last received station of the selected band is tuned in, and the
CONTROL buttons now work for tuner operations.

∞ (or 5) repeatedly until

3 or 2

• Pressing (or holding) CONTROL 

3 increases the frequencies.

• Pressing (or holding) CONTROL 

2 decreases the frequencies.

• When you hold and release CONTROL 

3

 or CONTROL 

2

, the

frequency keeps changing until a station is tuned in.

• When a station of sufficient signal strength is tuned in, the TUNED

indicator lights up on the display.

• When an FM stereo program is received, the ST (Stereo) indicator

also lights up.

Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.

Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.

• If you want to store the FM reception mode for this station,

select the FM reception mode you want. See “Selecting the
FM Reception Mode” on page 21.

The channel number position starts flashing on the display for
about 10 seconds.

3 (or 2) to select a channel

MEMORY

CONTROL

5

/

∞

/

3

/

2

Display

Source selecting buttons

(FM, AM)

Ex.: When selecting the FM band

Then

EN20-21.RX-E100SL[J]_f

01.3.7, 2:51 PM

20