JVC UX-G500V ユーザーズマニュアル
37
Menu
Item
Contents
PICTURE
PICTURE SOURCE
You can obtain optimal picture quality by selecting the source type of the video
source.
AUTO: Normally, select this option. The System recognizes the picture type (film
or video source) of the current picture according to its information.
FILM: For a film source picture.
VIDEO: For a video source picture.
source.
AUTO: Normally, select this option. The System recognizes the picture type (film
or video source) of the current picture according to its information.
FILM: For a film source picture.
VIDEO: For a video source picture.
SCREEN SAVER
You can set the screen saver function (ON or OFF). If no operation is done for
about 5 minutes, the TV screen dims.
about 5 minutes, the TV screen dims.
FILE TYPE
You can select the file type to play.
AUDIO: To play MP3/WMA/WAV files.
STILL PICTURE: To play JPEG files.
VIDEO: To play MPEG-1/MPEG-2/DivX files.
AUDIO: To play MP3/WMA/WAV files.
STILL PICTURE: To play JPEG files.
VIDEO: To play MPEG-1/MPEG-2/DivX files.
AUDIO
DIGITAL AUDIO OUTPUT
Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the
rear.
PCM ONLY: When connecting to audio equipment which is compatible with only
linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an
amplifier with a built-in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-
in DTS decoder.
rear.
PCM ONLY: When connecting to audio equipment which is compatible with only
linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an
amplifier with a built-in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-
in DTS decoder.
DOWN MIX
This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is
set to “PCM ONLY.”
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, etc.
set to “PCM ONLY.”
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, etc.
D. RANGE COMPRESSION
You can enjoy powerful audio even at a low volume level while playing Dolby
Digital software.
AUTO: Select to apply the effect to multi-channel encoded software.
ON: Select to always use this function.
Digital software.
AUTO: Select to apply the effect to multi-channel encoded software.
ON: Select to always use this function.
OTHERS
RESUME
You can select Resume.
ON: The System resumes playback from the position where playback has been
stopped.
OFF: Resume is deactivated.
ON: The System resumes playback from the position where playback has been
stopped.
OFF: Resume is deactivated.
ON SCREEN GUIDE
Activate (ON) or deactivate (OFF) the on-screen guide (see page 11).
DivX REGISTRATION
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded,
the System’s Registration Code is overwritten for copyright protection.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded,
the System’s Registration Code is overwritten for copyright protection.
EN37-46_UX-G500V[U]1.indd 37
EN37-46_UX-G500V[U]1.indd 37
3/11/08 12:58:34 PM
3/11/08 12:58:34 PM