JVC UX-G500V ユーザーズマニュアル

•  For JPEG files playback...
  – It is recommended that you record a file at 640 x 480 

resolution. (If a file has been recorded at a resolution 
of more than 640 x 480, it will take a long time to be 
shown.) 

  – This System can play back JPEG files with the extension 

code <.jpg> or <.jpeg> (regardless of the letter case—
upper/lower).

  – This System may not play back JPEG files properly if 

they are recorded from a device other than a digital 
camera.

•  For MPEG-1/MPEG-2 playback...
  – This System can play back MPEG-1/MPEG-2 files with 

the extension code <.mpg>, <.mpeg>, or <.mod>*.

    *  <.mod> is an extension code used for the MPEG-2 files 

  – The stream format should conform to MPEG system/

program stream.

  – 720 x 576 pixels (25 fps) / 720 x 480 pixels (30 fps) is 

recommended for the highest resolution.

  – This System also supports the resolutions of 352 x 576 / 

480 x 576 / 352 x 288 pixels (25 fps) and 352 x 480 / 
480 x 480 / 352 x 240 pixels (30 fps).

  – The file format should be MP@ML (Main Profile at 

Main Level)/SP@ML (Simple profile at Main Level)/
MP@LL (Main Profile at Low Level).

  – Audio streams should conform to MPEG1 Audio 

Layer-2 or MPEG2 Audio Layer-2.

•  For DivX playback...
  – This System can play only a disc of UDF-Bridge format. 

“Multi-border” is not supported.

  – The System supports all versions of DivX

®

 video 

(including DivX

®

 6).

  – The System supports DivX files whose resolution is 

720 x 480 pixels or less (30 fps), and 720 x 576 pixels or 
less (25 fps).

  – Audio stream should conform to Dolby Digital, 

MPEG1 Audio Layer-2 or MPEG Audio Layer-3 
(MP3).

  – This System can play back DivX files with the extension 

code <.divx> <.div> <.avi> (regardless of the letter 
case—upper/lower).

  – The System does not support GMC (Global Motion 

Compression).

  – The file encoded in the interlaced scanning mode may 

not be played back correctly.

•  This function also affects the sound through the 

headphones.

•  MY SOUND setup is prohibited for certain file format.

•  If you play back an NTSC disc/file with the color system 

set to “PAL (PRG),” the disc/file will be reproduced using 
“PAL 60” format; however, if the TV does not support 
this format, the screen may not display properly.

•  If you play back a PAL disc/file with the color system set 

to “NTSC (PRG),” you can watch the playback pictures, 
but the following symptoms may occur:

  – The items on the menu will be blurred, and be shown 

slightly shifted when highlighted.

  – The aspect ratio of the picture may differ from the 

original aspect ratio.

  – The picture movement is not smooth.
•  You cannot change the scanning mode to progressive in 

the following cases:

  – When your TV does not support the progressive video 

input.

  – When you have not connected your TV to the unit 

using a component video cord.

•  When you play back an NTSC disc/file in progressive 

scanning mode either NTSC PRG or PAL PRG, the 
System outputs the NTSC signal regardless of the color 
system settings.

•  “0:00” will flash on the display until you set the clock.
•  The clock may gain or lose 1 to 2 minutes per month. If 

this happens, reset the clock.

•  On some discs/files, you cannot change audio language 

during playback.

•  During slow-motion playback, no sound will be emitted.
•  While zoomed in, the picture may look coarse.

•  While programming steps...
  Your entry will be ignored if you have tried to program 

an item number that does not exist (for example, 
selecting track 14 on a disc that only has 12 tracks).

•  A-B Repeat is available only within the same title/

program/track.

EN37-46_UX-G500V[U]1.indd   39

EN37-46_UX-G500V[U]1.indd   39

3/11/08   12:58:38 PM

3/11/08   12:58:38 PM