JVC UX-G500V ユーザーズマニュアル

Recording and Editing Operations (see pages 25

to 28)

• Do not vibrate the System while recording/editing tracks.

Take care especially while “WAIT” is shown on the
display. It may damage the recorded tracks in the System.

Giving (Editing) Titles to Tracks or Groups:

• When a track is recorded, the track title is given to the

track automatically. When you give a title to the track,
delete that title first, then enter your desired title.

On-Screen Operations (see pages 29 to 33)

On-screen Bar Operations:

• For DVD-VR, “PG” or “PL” appears instead of “TITLE”

on the on-screen bar.

Daily Timer Operations (see pages 34 and 35)

Setting the Daily Timer:

• If you do not specify the preset station or track number

correctly while setting a timer, the currently selected
station or the first track will be played when the timer is
activated.

• When you unplug the power cord or if a power failure

occurs, the timer will be canceled. You need to set the
clock first, then the timer again.

• If you set DVD Video as the source, Daily Timer will not

work correctly.

• If you set the Sleep Timer after Daily Timer starts playing

the selected source, Daily Timer is canceled.

Setup Menu Operations (see pages 36 and 37)

General:

• If the upper and lower parts of the menu are cut off,

adjust the picture size control of the TV.

LANGUAGE menu:

• When the language you have selected for “MENU

LANGUAGE,” “AUDIO LANGUAGE,” or “SUBTITLE”
is not recorded, the original language is used as the initial
language.

PICTURE menu—MONITOR TYPE:

• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size

may become 4:3 letter box while playing a disc/file. This
depends on how the discs are recorded.

• When you select “16:9 NORMAL/16:9 MULTI

NORMAL” or “16:9 AUTO/16:9 MULTI AUTO” for
a picture whose aspect ratio is 4:3, the picture changes
slightly due to the process of converting the picture
width.

OTHERS menu—ON SCREEN GUIDE:

• The setup menu and on-screen bar will be displayed (and

recorded) even if this function is set to “OFF.”

Subtitles and the information for zoom-in always appear

on the display regardless of this setting.

Maintenance

To get the best performance of the System, keep your discs
and mechanism clean.

Handling Discs

• Remove the disc from its case by holding it at the edge

while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the

disc.

• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when

placing it back in its case.

• Avoid exposure to direct sunlight, extreme temperature,

and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from center
to edge.

Cleaning the System

• Stains should be wiped off with a soft cloth. If the System

is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean
with a dry cloth.

• Since the System may deteriorate in quality, become

damaged or get its paint peeled off, be careful about the
following:

  – DO NOT wipe it with a hard cloth.
  – DO NOT wipe it forcefully.
  – DO NOT wipe it with thinner or benzine.
  – DO NOT apply any volatile substance such as

insecticides to it.

– DO NOT allow any rubber or plastic to remain in

contact for a long time.

To remove the speaker grilles

Holes

Projection

Speaker grille

EN37-46_UX-G500V[U]1.indd 40

3/11/08 12:58:40 PM