JVC TH-M606 ユーザーズマニュアル

IMPORTANT
Before using the remote control for the following 
operation;
• Set the remote control mode selector to AUDIO.

Press F AUDIO.

Press F.

When DVD is selected as the source (

A pg. 19), the following 

messages will appear on the TV screen.

• The STANDBY lamp turns on when the power is turned off and turns 

off when the power is turned on.

• The power supply to the subwoofer is linked to the center unit. The 

POWER ON lamp on the subwoofer lights green when the power is 
turned on.

• A small amount of the power is consumed even when the power is 

turned off (center unit only). This is called standby mode and the 
STANDBY lamp lights in this mode. Unplug the power cord from the 
AC outlet to turn the power off completely.

• You can also turn on the system by pressing the following buttons;

•

One of 0 buttons on the center unit

•

One of the source selecting buttons on the remote control

•

One of the DISC (1-5) 3 buttons or 3 on the center unit.
You can use the same buttons on the remote control except after 
pressing FM/AM.

The buttons on the remote control are used to explain most of the 
operations in this manual. You can use the buttons on the center 
unit same as on the remote control for operations unless 
otherwise noted.

Source

selecting

buttons

Remote control 
mode selector

Cursor

(3/2/Y/5)/

• “OPEN”/“CLOSE”:

Appears when opening or closing the disc tray.

• “NOW READING”:

Appears when the system is reading the disc information.

• “REGION CODE ERROR!”:

Appears when the Region Code of the DVD VIDEO does not 
match the code the system supports. The disc cannot be 
played back.

• “NO DISC”:

Appears when no disc is loaded.

• “CANNOT PLAY THIS DISC”:

Appears when unplayable disc is loaded.