JVC TH-M606 ユーザーズマニュアル

DVD:

To play back a disc (DVD VIDEO, VCD etc.). (

A pg. 22)

FM/AM: To tune in an FM or AM station. (

A pg. 42)

Each time you press the button, the band alternates 
between FM and AM.

VCR:

To select the source from a component connected to the 
VCR IN jacks and AUDIO IN (VCR) jacks. (

A pg. 15)

DBS:

To select the source from a component connected to the 
DIGITAL IN (DBS) jack. (

A pg. 15)

• When AM, FM or DBS is selected as the source, the system does not 

output video signals.

• It may take time to change the source.

• Always set the volume to minimum level before starting any source.

If the volume is set at its high level, the sudden blast of sound could 
permanently damage your hearing and/or blow out the speakers.

CAUTION
Be sure to turn down the volume;

• Before connecting or putting on headphones as high volume may 

damage both the headphones and your hearing.

• Before disconnecting headphones as high volume may be suddenly 

output from the speakers.

While connecting a pair of headphones to the PHONES jack on the 
center unit, the system automatically cancels the surround mode 
(

A pg. 26) currently selected, deactivates the speakers, turn the 

subwoofer’s power off, and activates the headphone mode. 
“HEADPHONE” appears on the display window.

Headphone mode
When using the headphones, the following signals are output 
regardless of your speaker setting;
• For 2 channel sources, the front left and right channel signals are 

output from the headphones.

• Multi-channel signals are down-mixed and output from the 

headphones.

• (DVD AUDIO) When the disc prohibits down-mixing, only the 

front left and right channels are output from the headphones. In 
this case, “L/R ONLY” appears on the display window for a few 
seconds.

To restore the sound
Perform one on the following:
• Press MUTING again.
• Press AUDIO VOL +/– (or turn VOLUME on the center unit).

Each time you press the button, the brightness level changes.

See page 18 for button locations.