JVC GVT0244-008A ユーザーズマニュアル

⁄

@

 

• When connecting the speaker cords, match their polarity 

with that of the speaker terminals: blue/red to (+) and black 
to (–).

• Use only speakers with the same speaker impedance as 

indicated by the speaker terminals on the rear of the System.

• The main speakers and subwoofer are magnetically shielded 

to avoid color distortions on TVs. However, if not installed 
properly, it may cause color distortions. So, pay attention to 
the following when installing the speakers.
– When placing the speakers near a TV set, turn off the 

TV’s main power switch or unplug it before installing the 
speakers.
Then wait at least 30 minutes before turning on the TV’s 
main power switch again.

Some TVs may still be affected even though you have 
followed the above instruction. If this happens, move the 
speakers away from the TV.

¤

 

Plug the AC power cord to a wall outlet.

Red

White

Press and hold

Insert

Release

From main right speaker (blue/
black)

From main left speaker (blue/
black)

From the subwoofer (red/black)

 

• DO NOT connect more than one speaker to 

each terminal.

• DO NOT push or pull the speakers as this 

will damage the foot spacers at the bottom 
of the speakers.

DX-J21[J].book Page 5 Tuesday, April 8, 2008 11:32 AM