JVC GVT0244-008A ユーザーズマニュアル

ページ / 56
 
6
 
Connecting a USB Mass storage class device
 
You can connect a USB mass storage class device such as a 
USB flash memory, hard disk drive, multimedia card reader, 
digital camera, etc. to this System.
• You cannot connect a personal computer to the
 (USB 
MEMORY) terminal of the System.
• When connecting with a USB cable, use the USB 2.0 cable 
whose length is less than 1 m (3.3 ft).
 
Preparing the Remote Control 
 
Insert the batteries into the remote control by matching the 
polarity (+ and –) correctly.
• If the range of effectiveness of the remote control decreases, 
replace both batteries.
 
Canceling the Demonstration
 
To start the demonstration, 
 
select DEMO START.
 
Changing the Color System 
 
 
You can select the video output to match it to the color 
system of your TV (NTSC or PAL).
• You can change the setting only while playback is stopped.
 
1
 
Enter the color system setting mode.
 
2
 
Select the color system.
 
3
 
Store the setting.
When using the remote control,
 
 point the top of the 
remote control toward the remote sensor as directly as 
possible. If you operate it from a diagonal position, the 
operating range (approx. 5 m/16.4 ft) may be shorter.
 
Caution:
 
Battery shall not be exposed to excessive heat such as 
sunshine, fire or the like.
USB cable 
(not supplied)
Main unit
R6(SUM-3)/AA(15F)
Main Unit
ONLY
2
 sec.
DEMO OFF
DEMO START
Remote
ONLY
INFO
2
 sec.
DX-J21[J].book Page 6 Tuesday, April 8, 2008 11:32 AM