JVC NX-DV3 ユーザーズマニュアル

• Do not put adhesive tape or stickers, or write on 

a disc.

• Do not bend a disc.

• Be sure not to use heart/flower shaped discs or 

other irregularly shaped discs. The use of such 

discs damages the main unit.

• Be sure not to use thinners, benzenes, cleaners 

for analog records, or other chemical agents.

• A write protect knob is attached to an MD for 

preventing accidental erasure of recorded 

sound.

• Do not put labels such as those indicating CD/track 

titles or other notes on any part of an MD other than 
the specified position. If you insert an MD with a 
label extending beyond the specified area, a label 
that is peeling off, or any other improperly attached 
label, it may damage the main unit.

• Gently dust the cabinet surface with a soft dry 

cloth. When the cabinet is very dirty, dampen the 

cloth with a neutral detergent diluted with water, 

wring out the cloth well, and then wipe the cabi-

net with the dampened cloth followed by a soft 

dry cloth.

• Do not wipe the cabinet with thinners or ben-

zenes. Wiping it with these agents may cause 

discoloration of the cabinet or removal of the 

paint. Do not spray insecticides or other highly 

volatile agents onto the cabinet. Do not leave 

pieces of rubber or plastic on the cabinet for a 

long period.

Handling discs 

Cleaning discs

Signal surface

Wipe a disc from the 
center outward with a 
soft cloth.

Scratches concentrated 
on a certain part cause 
sound dropout.

Handling MDs

• Do not open the shut-

ter. Forcibly opening 

the shutter will break 

the MD.

Preventing the loss of important 

recorded sound

Write protect knob

Close the write 
protect knob before 
recording or editing.

Open the write 
protect knob to avoid 
erasing sound.

Cleaning the main unit cabinet

NX-DV3[UJ].book  72 ページ  ２００４年１２月２８日　火曜日　午後２時３７分