JVC NX-DV3 ユーザーズマニュアル

ページ / 82
Introduction
73
Reference
MD/Disc Messages
MD message
Meaning
Possible solution
CANNOT ENTRY!
The track has already been in the selected 
group.
Select an appropriate track. (
 page 61)
CANNOT FORM!
There is a group between the selected tracks.
Select appropriate tracks. (
 page 60)
CANNOT GROUP!
There is no space for storing more group 
information.
(Group information is stored in the same area 
as title information.)
You cannot form a group any more on the MD. 
(Erase the disc or track titles you do not need.)
CANNOT JOIN
You are trying to join tracks that have different 
MDLP modes (SP/LP2/LP4), or tracks of only 8 
or less seconds (in SP mode).
The MD system restricts such operation.
CANNOT LISTEN
You are trying to adjust the volume during high 
speed recording. 
You cannot listen to sound from a CD during 
high speed recording. 
CANNOT REC
You are trying to operate one-track-recording 
with a VCD or SVCD during PBC playback. 
Set PBC to off (
 page 26). 
CANNOT TITLE
You are trying to enter a total of 1793 or more 
characters to an MD.
You cannot enter more titles.
READ ERROR
The main unit cannot read the MD.
Turn off the main unit. If the same message 
appears again, the MD may be damaged. 
Replace the MD.
DISC FULL
There is no more space in the MD, or you are 
trying to record 255 or more tracks.
Replace the MD. (
 page 71).
DISC PROTECTED The MD is write-protected.
Close the write protect knob on the MD. 
(
 
page 72).
EMERGENCY 
STOP
A malfunction occurred during recording. 
Press   to quit recording, press 
 to eject 
the MD, and then start recording again.
GROUP FULL
You are trying to form 100 or more groups.
You can form up to 99 groups.
GROUP TRACK
You are trying to form a group with a track 
already belonging to another group.
Select tracks that do not belong to any groups. 
(
 page 60)
LOAD ERROR
The MD is not properly loaded.
Insert the MD properly.
MD NO DISC
No MD is loaded.
PLAYBACK DISC
You are trying to edit or record to an MD which 
is designed only for playback.
Replace the MD with a recordable MD.
SCMS CANNOT 
COPY
You are trying to make a digital audio duplica-
tion of a CD-R or CD-RW.
Operate analog recording at normal speed. 
(
 page 51)
TRACK 
PROTECTED
You are trying to divide, join, or erase tracks 
which are recorded in the Net MD format.
Edit the tracks on equipment compatible with 
Net MD.
The tracks are write-protected by equipment 
other than this product.
Edit the tracks with the equipment on which the 
tracks were recorded.
HCMS CANNOT 
COPY
You are trying to record a track with the high 
speed recording function within 74 minutes of 
starting to record the same track with the high 
speed recording function. 
Wait 74 minutes, or change from high speed 
recording to normal speed recording.
BLANK DISC
There are no tracks in the MD.
Disc message
Meaning
Possible solution
CANNOT PLAY
You are trying to play back an unplayable disc or 
a disc that has many scratches.
Replace the disc.
NO DISC
No disc is loaded.
NO AUDIO
The disc may be an illegally copied disc. 
You cannot listen to the disc. 
LR ONLY
You are playing back a multi-channel track for 
which down-mix is prohibited. 
This is normal operation. 
The surround is turned "OFF" or headphones 
are connected to the main unit.
Set the surround mode and play back the disc 
with headphones being disconnected.
MULTI CH
You are trying to turn the surround "OFF" while 
multi-channel sound where down mix is not 
allowed was being played.
This is normal operation.
If you wish to play the sound with surround 
"OFF", pause once, turn surround "OFF" and 
then restart.
NX-DV3[UJ].book  73 ページ  2004年12月28日 火曜日 午後2時37分