JVC CA-DXU8 ユーザーズマニュアル

ページ / 104
 
6
 
Connecting a USB Mass Storage Class Device
 
You can connect a USB mass storage class device such as a 
USB flash memory, hard disk drive, multimedia card reader, 
digital camera, etc. to this System.
• You cannot connect a computer to the
 (USB memory) 
terminal of the System.
 
Preparing the Remote Control
 
If the range or effectiveness of the remote control decreases, 
replace both batteries.
 
Canceling the Demonstration
 
To start the demonstration, 
 
select DEMO START.
 
Changing the Color System and
 
Scanning Mode
 
You can select the video output to match it to the color 
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the 
COMPONENT jacks, you can enjoy a high quality picture 
by selecting progressive scanning mode.
• You can change the setting only while playback is stopped.
 
1
 
Enter the color system setting mode.
 
2
 
Select the color system and scanning mode.
 
3
 
Store the setting.
When using the remote 
control,
 
 point the top of the 
remote control toward the 
remote sensor as directly as 
possible. If you operate it 
from a diagonal position, 
the operating range (approx. 
5 m) may be shorter.
 
Caution
 
Do not expose batteries to heat or flame.
USB cable 
(not supplied)
Main unit
R6(SUM-3)/AA(15F)
 
NTSC / PAL
 
NTSC or PAL Interlaced scanning. 
For a conventional PAL or NTSC TV.
 
NTSC PROG/ 
PAL PROG
 
NTSC or PAL Progressive scanning. 
For a progressive NTSC or PAL TV.
Main Unit
ONLY
2
 sec.
DEMO OFF
DEMO START
Remote
ONLY
INFO
SCAN MODE
VFP
2
 sec.
PAL
PAL PROG
NTSC PROG
NTSC
ENTER
/SET
DX-U6[U].book Page 6 Monday, March 26, 2007 2:22 PM