ONKYO T-433 ユーザーズマニュアル

 

10

 

If you connect another component from the Onkyo Separate Collection to the T-433 with the supplied 

 and audio 

cables, you can use the following system functions. 

 cables are special cables solely for use with Onkyo products.

• Simply connecting an 

 cable will not enable the system functions. You must make an audio connection as well. 

See page 11 for more information.

• See the instruction manual supplied with each component for more information about the 

 system functions.

• Refer to the instructions that came with the com-

ponent you are connecting.

• Do not plug in the power cord until all other con-

nections are complete.

• Do not bind audio cables with power cords and 

speaker cables. Doing so may adversely affect the 
sound quality.

• To prevent interference, keep power cords and 

speaker cables as far away as possible from the 
tuner’s antennas.

• Red connectors are used for the right channel, and 

white connectors are used for the left channel.

• Push each plug in all the way to make a good con-

nection (loose connections can cause noise or mal-
functions).

Connecting components from the Onkyo Separate Collection.

See the amplifier’s instruction manual.

Auto Power On
When you turn on the power or start playback on the T-433, the amplifier will turn on automatically. (The ampli-
fier’s POWER switch must be set to ON for this to work.)

Direct Change
When a preset is selected, or the FM or AM band is selected, the amplifier will automatically select the tuner input.

Remote Control Operation
You can control the T-433 by using the A-933’s remote con-
troller.

See page 8 for more information.

Program Timer
You can program the T-433’s timers to automatically start play-
back or recording at a specified time. 

See page 22 for more information.

*En_T433_02.fm Page 10 Tuesday, February 15, 2005 3:09 PM