Anchor Audio AN-130F1+ ユーザーズマニュアル
MADE IN USA
SIX YEAR WARRANTY
AN-130+ Speaker Monitor Owners Manual
3
NOTE: If the system is not responding be sure the signal is not blocked.
WIRELESS REMOTE CONTROL
REMOTE OPERATION
(AN-130RC+ or AN-130F1RC+)
Point the red Mute button towards the front
of the AN-130RC+, aiming the remote at
the red window located near the Volume and
Tone controls.
REMOTE OPERATION
(AN-130RC+ or AN-130F1RC+)
Point the red Mute button towards the front
of the AN-130RC+, aiming the remote at
the red window located near the Volume and
Tone controls.
• Raise volume by pressing Volume Up
• Lower volume by pressing Volume
• Lower volume by pressing Volume
Down
• Mute system by pressing Mute
• Stop mute by pressing Mute again or
• Stop mute by pressing Mute again or
pressing either volume button
REPLACING THE REMOTE BATTERY
1. Locate the latch on the bottom of the
remote, near the back
2. Gently pull the latch towards the
center of the remote
3. Slide out the battery holder carefully
4. Place a new battery in holder with
4. Place a new battery in holder with
positive symbol on the battery
facing up
facing up
5. Carefully re-insert the battery holder
VOLUME
DOWN
MUTE
VOLUME UP
BATTERY
REMOTE CONTROL
BOTTOM
BATTERY
HOLDER
NOTE: Use only CR2025 or CR2032 type batteries.