JVC kd-sc601 ユーザーズマニュアル
8
ENGLISH
Canceling the display
demonstration
demonstration
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
• It is recommended to cancel the display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
• It is recommended to cancel the display
demonstration before you use the unit for the
first time.
first time.
To cancel the display demonstration, follow
the procedure below:
the procedure below:
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 31 and 32.)
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 31 and 32.)
2
Select “DEMO” if not shown on the
display.
display.
3
Select “DEMO OFF.”
4
Finish the setting.
To activate the display demonstration, repeat
the same procedure and select “DEMO ON” in
step
the same procedure and select “DEMO ON” in
step
3.
DEMO OFF
DEMO ON
EN07-09_KD-SC601[E_EX_EU]f.p65
10/3/03, 12:33 PM
8