Pyramid Car Audio CDR-38DX ユーザーズマニュアル

Page 07

Page 02

FM

AM

BAND
Press BND button (10) to change bands as 
below:

SELECT STATION 
Rotate TUNING knob (11) clockwise or 
anticlockwise to adjust the frequency 
upward or downward.

LOCAL/DISTANT
Press the LOC/RPT button (12) to select 
between local setting for reception of strong 
station and distant setting for reception of 
weak station when tuning.

MONO/STEREO
In FM band, press MON/INT button (13) 
to select mono or stereo reception for radio 
stations. You can sometimes improve 
reception of distant stations by selecting 
mono operation.

DISC PLAY 
Gently insert a CD with the label side facing 
up into the Disc Slot (16). The CD is then 
automatically loaded into the unit and starts 
playing with the first track of the disc. The 
digital display will indicate the track number 
and the time of the track.

EJECT
Press Eject button (15) to stop CD 
playback and eject CD from slot. Receiver 
switches to radio operation.

PAUSE CD
Press Play/Pause button (14) to 
temporarily stop the playback. Press it again 
to resume playback.

SKIP TRACKS
Press Track Forward button (17) or 
Track Reverse button (18) to choose the 
following track or the previous track. Track 
numbers show on display.

FAST FORWARD/FAST REVERSE
Hold Track Forward button (17) or 
Track Reverse button (18) for several 
seconds to fast forward or fast reverse. 
Releasing the button to stop fast forward 
and fast reverse playback.

REPEAT
Press LOC/RPT button (12) to 
continuously repeat playing the current 
track. Press it again to cancel the function.

INTRO: 
PREVIEW ALL TRACKS
Press MON/INT button (13) to play first 
several seconds for each track. Press it again 
to stop intro and back to normal playback.

RANDOM: 
RANDOM TRACKS PLAYBACK
Press and hold LOU/RDM button (8) for 
several seconds to play all tracks in the 
random order. Press it again to cancel the 
function.

30

Choose the mounting location where the unit will not interfere with the normal driving function 
of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected 
up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized 
parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other 
modifications of the vehicle.

Install the unit where it does not get in the driver's way and cannot injure the passenger if there 
is a sudden stop. Like an emergency stop.

If installation angle exceeds 30° from horizontal, the unit might not give its optimum 
performance.

Avoid installing the unit where it would be subject to high temperature, such as from direct 
sunlight, or from hot air, form the heater, or where it would be subject to dust, dirt or excessive 
vibration.

Installing the unit

1. Dashboard
2. Holder

After inserting the holder into the 
dashboard, select the appropriate tab 
according to the thickness of the 
dashboard material and bend them 
inwards to secure the holder in place.

3. Screw