Mitsubishi Electronics MR-J3 ユーザーズマニュアル
16 - 35
16. INDEXER POSITIONING OPERATION
16.5.5 Point table setting
Set necessary items to the point table before starting operation. The following table indicates the items that
must be set.
must be set.
Name Description
Position data
Not used in indexer positioning operation.
Do not change this value by any means.
Do not change this value by any means.
Servo motor speed
Set the command speed of the servo motor for execution of positioning.
Acceleration time constant
Set the acceleration time constant.
Deceleration time constant
Set the deceleration time constant.
Dwell
Not used in indexer positioning operation.
Do not change this value by any means.
Do not change this value by any means.
Auxiliary function
Not used in indexer positioning operation.
Do not change this value by any means.
Do not change this value by any means.
16.5.6 Actual operation
Start actual operation after confirmation of normal operation by test operation and completion of the
corresponding parameter settings. Perform a home position return as necessary.
corresponding parameter settings. Perform a home position return as necessary.