Sony Car Amplifier 仕様ガイド
2002 SONY MOBILE
PRODUCT GUIDE
Design and Specifications subject to change without notice.
1200W Max Power
300W x 1 into 4W, 5-300Hz, @ 0.2%THD
600W x 1 into 2W, 5-300Hz, @ 0.6%THD
1000W x 1 into 1W, 5-300Hz, @ 1.2%THD
Class D Mono Subwoofer Amplifier
MOSFET Outputs
MOSFET Power Supply
High Current 1W Stability
Variable 50-300Hz Low Pass Filter
40 HZ EQ Boost, RCA Output
RCA and Speaker Level Inputs
MOSFET Power Supply
High Current 1W Stability
Variable 50-300Hz Low Pass Filter
40 HZ EQ Boost, RCA Output
RCA and Speaker Level Inputs
Indicates step-up
XM-1600GSD
Mono Class D Amplifier
Other Specifications
Circuit system
OTL (output transformerless) circuit
Pulse power supply
Pulse power supply
Inputs
RCA pin jacks
High level input connector
High level input connector
Outputs
Speaker terminals
Through out pin jacks
Through out pin jacks
Speaker impedance
1 8W
Maximum outputs
600 W (at 4W)
1200 W (at 2W)
1200 W (at 2W)
Rated outputs (supply voltage at 14.4 V)
300 W (20 Hz 300 Hz, 0.2% THD, at 4W)
600 W (20 Hz 300 Hz, 0.6% THD, at 2W)
1000 W (20 Hz 300 Hz, 1.2% THD, at 1W)
600 W (20 Hz 300 Hz, 0.6% THD, at 2W)
1000 W (20 Hz 300 Hz, 1.2% THD, at 1W)
Frequency response
5 Hz 300 Hz ( +0.5 dB, -3 dB)
Harmonic distortion
0.06% or less (at 100 Hz, 4W)
Input level adjustment range
0.2 6.0 V (RCA pin jacks)
0.4 12.0 V (High level input)
0.4 12.0 V (High level input)
Low-pass filter
50 300 Hz, 18 dB/oct
Low boost
0 10 dB (40 Hz)
Power supply voltage
10.5 16 V
Current drain
at rated output : 40 A (4W)
Remote input : 2 mA
Remote input : 2 mA
Dimensions
Approx. 358 × 50 × 264 mm (w/h/d)
14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls
14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls
Mass
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Supplied accessories
Mounting screws (4)
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
300 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.
300 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.