Marantz AV7701 ユーザーズマニュアル

116

Picture quality can be adjusted.
We recommend leaving the settings unchanged from the default settings. First adjust the display image 
quality on your TV, and use this menu only when you want to make fine adjustments.
• This item can be set when the input source is  CBL/SAT   DVD   Blu-ray   GAME   AUX1   AUX2  

MEDIA PLAYER   CD   NETWORK   TV AUDIO .

• With input sources other than the ones above, this item can be set when “Video Select” is selected. In 

this case, the original input source settings are called out.

• Can be set when the “Video Conversion” setting (

) is “On”.

• “Blu-ray”, “GAME”, “AUX2”, “TV AUDIO” or “CD” can be set when “HDMI” or “COMP” (

Contrast
Adjust picture contrast.

Brightness
Adjust picture brightness.

Saturation
Adjust picture chroma level 
(saturation).

Hue
Adjust green and red 
balance.

Noise Reduction
Reduce overall video noise.

Off / Low / Medium / High

Enhancer
Emphasize picture contours.

• “Picture Adjust” can not be set when video and component video signals are output.
• “Picture Adjust” can not be set when 4K signals are input.

Make settings for HDMI video/audio output.

Auto Lip Sync
Make automatic 
compensation for timing 
shift in audio and video 
output.

On : Compensated.
Off : Not compensated.

HDMI Audio Out
Select HDMI audio output 
device.

AVP : Play back through speakers connected to Power Amplifier. (Audio is 
output from the PRE OUT terminal0 on this unit.)
TV : Play back through TV connected to the unit.

• The audio signal input from the HDMI input connector can be output as 

an output signal from the HDMI output connector by setting the HDMI 
audio output destination to TV.
Audio signals input via the Analog/Coaxial/Optical input connectors 
cannot be output from the HDMI output connector.

• When the HDMI control function is activated, priority is given to the TV 

audio setting (

v See overleaf

DVD