Marantz AV7701 ユーザーズマニュアル

117

Video Output
Make settings for HDMI 
monitor output.

Auto (Dual) : The presence of a TV connected to the HDMI MONITOR 
1 or HDMI MONITOR 2 connector is detected automatically, and that TV 
connection is used.
Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always 
used. Video is not output from the TV connected to the HDMI MONITOR 
2 connector.
Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always 
used. Video is not output from the TV connected to the HDMI MONITOR 
1 connector.

• If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are 

) is set to “Auto”, the signals 

are output with a resolution compatible with both TV.

• With “Resolution” (

) not set to “Auto”, check whether 

the TV you are using is compatible with the resolution under “Video” – 
“Monitor” (

• This can also be set by pressing 

 on the main unit.

Each time 

 is pressed, the setting is changed as shown below.

Auto (Dual)

Monitor 1

Monitor 2

Depending on the monitor you have connected, the display may not 
be correct when you set to “Auto (Dual)”. In such a case, set to either 
“Monitor 1” or “Monitor 2”.

HDMI Control
You can link operations with 
devices connected to HDMI 
and compatible with HDMI 
Control.

On : Use HDMI control function.
Off : Do not use HDMI control function.

• When a device that is not compatible with the HDMI control function is 

connected, set “HDMI Control” to “Off”.

• Please consult the operating instructions for each connected device to 

check the settings.

• Refer to “HDMI control function” (

about the HDMI control function.

• When “HDMI Control” is set to “On”, it consumes more standby 

power.  If you are not using this unit for an extended period, it is 
recommended that you unplug the power cord from the power outlet.

• The HDMI control function controls operations of a TV that is compatible 

with the HDMI control function. Make sure that the TV and HDMI are 
connected when you perform HDMI control.

• If the “HDMI Control” settings have been changed, always reset the 

power to connected devices after the change.

Standby Source
Sets the HDMI input source 
to put into standby when 
the power is on.

Last : Enters standby with the previously used input source.
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / 
CD : Enters standby with each of the input sources assigned to each input 
connector.

 “Standby Source” can be set when “HDMI Control” is set to “On”.

Control Monitor
Set the HDMI MONITOR 
terminal to output the HDMI 
control signal.

Monitor 1 : Output from the HDMI MONITOR 1 connector.
Monitor 2 : Output from the HDMI MONITOR 2 connector.

• “Control Monitor” can be set when “HDMI Control” is set to “On”.
• ARC function works only with the terminal selected by “Control 

Monitor”.

Power Off Control
Links the power standby of 
this unit to external devices.

All : If power to a connected TV is turned off independently of the input 
source, power to this unit is automatically set to standby.
Video : If power to a connected TV is turned off when the input source is 
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / CD, 
power to this unit is automatically set to standby.
Off : This unit does not link with power to a TV.

 “Power Off Control” can be set when “HDMI Control” is set to “On”.

DVD