ONKYO TX-SR702 操作ガイド

 

35

 

■

 

If you connect to a digital audio input, you’ll need to 
assign it (see page 42).
• Use an optical digital audio cable to connect one of the 

AV receiver’s OPTICAL DIGITAL IN jacks to the 
optical output on your recorder, as shown.

OR
• Use a coaxial digital audio cable to connect one of the 

AV receiver’s COAXIAL DIGITAL IN jacks to the 
coaxial output on your recorder, as shown.

 

■

 

If your recorder has a digital input, by connecting it to 
the AV receiver’s optical DIGITAL OUT jack, you can 
record digitally. (With the TX-SR702/702E, you can use 
its coaxial DIGITAL OUT jack.) However, because the 
AV receiver doesn’t convert analog input signals to dig-
ital and vice versa, only input signals connected to a 
DIGITAL IN jack can be recorded in this way.

 

Don’t connect the recorder’s digital output to the AV 
receiver when the recorder’s digital input is connected to 
one of the AV receiver’s digital outputs. Doing so may 
create a signal loop and cause a malfunction.

Connect one or the other

Connect one or the other

TX-NR702,602_En.book Page 35 Tuesday, September 7, 2004 1:18 PM