ONKYO TX-SR702 操作ガイド
37
Connecting the AV receiver
—Continued
If you want to connect a more powerful power amplifier
and use the AV receiver as a preamp, you can connect
one to the PRE OUT jacks. In this case, you should con-
nect all speakers and the subwoofer to that power ampli-
fier. However, if you have a powered subwoofer, connect
it to this AV receiver’s PRE OUT SUBWOOFER jack.
and use the AV receiver as a preamp, you can connect
one to the PRE OUT jacks. In this case, you should con-
nect all speakers and the subwoofer to that power ampli-
fier. However, if you have a powered subwoofer, connect
it to this AV receiver’s PRE OUT SUBWOOFER jack.
With
(Remote Interactive) you can control your
-compatible Onkyo CD player, DVD player, and so
on with the AV receiver’s remote controller, as follows:
• To use
, you must make an analog audio con-
nection between the AV receiver and the other AV
components, even if they are connected digitally.
components, even if they are connected digitally.
Auto Power On/Standby
When you start playback on an AV component con-
nected via
nected via
, if the AV receiver is in Standby, it will
turn on and select that AV component as the input source
automatically. Similarly, when the AV receiver is set to
Standby, all components connected via
automatically. Similarly, when the AV receiver is set to
Standby, all components connected via
also enter
Standby. Note that this function will not work if the com-
ponent’s power cord is connected to one of the AV
receiver’s AC OUTLETS.
ponent’s power cord is connected to one of the AV
receiver’s AC OUTLETS.
Direct Change
When playback is started on an AV component con-
nected via
nected via
, the AV receiver automatically selects
that AV component as the input source.
Remote Control
You can control your
-compatible Onkyo compo-
nents with the AV receiver’s remote controller.
Notes:
• Push plugs in all the way to make good connections.
• Use only
• Use only
cables for
connections. No
cables are supplied with this AV receiver.
• Some AV components have two
jacks. You can
connect either one to this AV receiver. The other jack
is for connecting more
is for connecting more
-compatible components.
• Connect the AV receiver’s
jack to only Onkyo AV
components. Connecting to other manufacturer’s AV
components may cause them to malfunction.
components may cause them to malfunction.
• Some components may not support all
functions.
Refer to the manuals supplied with your components.
Connecting a Power Amplifier
(TX-SR702/702E only)
(TX-SR702/702E only)
8
7
6
5
4
3
2
1
1. Subwoofer
2. Front left speaker
3. Center speaker
4. Front right speaker
5. Surround left speaker
2. Front left speaker
3. Center speaker
4. Front right speaker
5. Surround left speaker
6. Surround right speaker
7. Surround back left
7. Surround back left
speaker
8. Surround back right
speaker
Power amplifier
Connecting
Components
REMOTE
CONTROL
L
R
IN
L
R
L
R
AUDIO
OUTPUT
AUDIO
OUTPUT
L
R
IN
e.g., DVD player
e.g., MD recorder
TX-NR702,602_En.book Page 37 Tuesday, September 7, 2004 1:18 PM