Siemens CCIC1410 ユーザーズマニュアル
Installation
20
Siemens Building Technologies
Fire Safety & Security Products
05.2009
7.1.2 Internet
connection with static IP
Choose this connection type if you are required to use a static IP for the network
camera and proceed as follows.
1.
camera and proceed as follows.
1.
Set up the network camera in the LAN (see chapter 8.5.2).
2.
Go to Configuration > Network > Network Type.
3.
Select LAN > Use fixed IP address.
4.
Enter the static IP, Subnet mask, Default router, Primary DNS provided by
your ISP.
your ISP.
7.1.3
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line
(see chapter 8.5.1: PPPoE setting).
(see chapter 8.5.1: PPPoE setting).