Siemens CCIC1410 ユーザーズマニュアル
Configuration with the CCIC1410 Homepage
81
Siemens Building Technologies
Fire Safety & Security Products
05.2009
Select to send the media to an FTP server when a trigger is activated.
Î
Server address:
Enter the domain name or IP address of the FTP server.
Î
Server port:
By default, the FTP port server is set to 21. Also, it can be assigned another port
number between 1025 and 65535.
number between 1025 and 65535.
Î
User name:
Enter the login name of the FTP account.
Î
Password:
Enter the password of the FTP account.
Î
Remote folder name:
Enter a folder in which to save the media file. If the folder name does not exist,
the network camera will create one on the FTP server.
the network camera will create one on the FTP server.
Î
Passive mode:
Most firewalls do not accept new connections initiated by external requests. If
the FTP server supports passive mode, select this option to enable passive
mode FTP and allow data transmission to pass through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will
be shown in a pop-up window. If it works, you will also receive a test.txt file on
the FTP server.
the FTP server supports passive mode, select this option to enable passive
mode FTP and allow data transmission to pass through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will
be shown in a pop-up window. If it works, you will also receive a test.txt file on
the FTP server.
–
HTTP:
Select to send the media to an HTTP server when a trigger is activated.
Select to send the media to an HTTP server when a trigger is activated.
Î
URL:
Enter the URL of the HTTP server.
Î
User name:
Enter the user name.
Î
Password:
Enter the password.
To verify if the HTTP settings are correctly configured, click Test. The result will
be shown in a pop-up window. If it works, you will also receive a test.txt file on
the HTTP server.
To verify if the HTTP settings are correctly configured, click Test. The result will
be shown in a pop-up window. If it works, you will also receive a test.txt file on
the HTTP server.
–
Alarm server:
Select to send a message to a specified port address.
Select to send a message to a specified port address.
Î
Alarm Server IP Address:
Enter the target IP address.
Î
Alarm Server Port Number:
Enter the target port number.
9.14 System
log
This section explains how to configure the network camera to send the system log
to a remote server as a backup. The system log is composed of the following two
columns: Remote Log and Current Log.
to a remote server as a backup. The system log is composed of the following two
columns: Remote Log and Current Log.
9.14.1 Remote
log
You can configure the network camera to send the system log file to a remote
server as a log backup. Before utilizing this feature, it is recommended to install a
server as a log backup. Before utilizing this feature, it is recommended to install a