Siemens CCIC1410 ユーザーズマニュアル
Configuration with the CCIC1410 Homepage
83
Siemens Building Technologies
Fire Safety & Security Products
05.2009
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2.
Choose the Configuration menu.
3.
On the left hand side, choose the menu item View parameters.
Î
The parameter list appears.
9.16 Maintenance
This chapter explains how to reset the network camera to the factory default.
9.16.1 Reboot
This feature allows you to restart the network camera. It takes about 1 – 2 minutes
to complete the process. When completed, the live video will be displayed in your
browser.
to complete the process. When completed, the live video will be displayed in your
browser.
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2.
Choose the Configuration menu.
3.
On the left hand side, choose the menu item Maintenance.
4.
In the Reboot section, click Reboot.
Î
The following message is displayed during the rebooting process.
Î
If the connection fails after rebooting, manually enter the IP address of the
network camera in the address field to resume the connection.
network camera in the address field to resume the connection.
9.16.2 Restore
This feature allows you to restore the factory default settings of the network
camera. Two settings can be excluded.
camera. Two settings can be excluded.