ZyXEL Communications 3.1 ユーザーズマニュアル

Chapter 39 File Manager

ZyWALL (ZLD) CLI Reference Guide

This example saves a back up of the current configuration before applying a shell script file.

These commands run the aaa.zysh script at noon every day, on the first day of every month, and 
on every Monday, Wednesday, and Friday.

You can use FTP to transfer files to and from the ZyWALL for advanced maintenance and support. 

Connect to the ZyWALL. 

Enter “bin” to set the transfer mode to binary.

You can upload the firmware after you log in through FTP. To upload other files, use “cd” to change 
to the corresponding directory.

Use “put” to transfer files from the computer to the ZyWALL.

1

 For example:

In the conf directory, use "put config.conf today.conf” to upload the configuration file (config.conf) 
to the ZyWALL and rename it “today.conf”. 

"put 1.00(XL.0).bin” transfers the firmware (1.00(XL.0).bin) to the ZyWALL. 

show running-config

Displays the settings of the configuration file that the system is using.

setenv-startup stop-on-error off

Has the ZyWALL ignore any errors in the startup-config.conf file and apply 
all of the valid commands.

show setenv-startup

Displays whether or not the ZyWALL is set to ignore any errors in the 
startup-config.conf file and apply all of the valid commands.

write

Saves your configuration changes to the flash (“non-volatile” or “long 
term”) memory. The ZyWALL immediately uses configuration changes 
made via commands, but if you do not use the 

write

 command, the 

changes will be lost when the ZyWALL restarts.

File Manager Commands Summary (continued)

Router(config)# copy running-config /conf/backup.conf

Router(config)# run /script/vpn_setup.zysh

Router> configure terminal

Router(config)# schedule-run 1 aaa.zysh daily 12:00 

Router(config)# schedule-run 1 aaa.zysh monthly 12:00 01 

Router(config)# schedule-run 1 aaa.zysh weekly 12:00 mon wed fri 

Router(config)#