Canon VB101 ユーザーズマニュアル

Administration Account
The same settings can be specified on the 
System settings page.

"Administrator ID"
Sets the ID used by the administrator. Up 
to 15 characters can be set consisting of 
alphanumeric characters, underscores 
and hyphens. The default setting is "root".
 
"Password"
Sets the password. Up to 15 ASCII 
characters can be used (space or printable 
characters). The default setting is "VB101".
 
"Confirm Password"
Confirms the password in the field above.

Target Application  
Chooses " Webview Livescope" or "VIEW-
Windows 1.21" as the application used by 
the VB101.

VIEW-Windows is an optional product 
designed specifically for use within Japan. 
Do not select VIEW-Windows 1.21.

Ethernet
The same settings can be specified on the Network settings 
page.
 

"Use Ethernet"
Tick this checkbox to use Ethernet.
 
"Address Settting Method"
If you select "Auto Setting (Bootp)", the IP address is automatically 
acquired by the Bootp server after restart. If you select "Manual 
Setting", enter the IP address and subnet mask also.
 
"IP Address"
Enter a network interface-specific IP address.
 
"Subnet Mask"
Enter the subnet mask specified for the network to be 
connected.
 
"Default Gateway Address"
Specify this setting when you are connecting to a wide area 
network such as the Internet.
 
If you selected "Auto Setting (Bootp)" as the address setting 
method, check that the Bootp server has been started up.

Contact the network administrator for the IP address, subnet 
mask, and default gateway address settings.

This page contains indispensable settings taken from the various settings pages for the VB101. If

values are specified for these settings on other pages, the most recent change is valid.

Click the [OK] button to change the settings. To discard the changes, click the

[Cancel] button. This returns you to the title page.