JVC DT-3D24G1 ユーザーズマニュアル

Setting the CAMERA ASSIST MENU

This product is equipped with various camera rig adjustment assist functions for 3D viewing. Use the functions for camera adjustment in
shooting.

Menu Operations

Press the CAMERA ASSIST button.

The CAMERA ASSIST MENU appears.

➔

●

Only works when the SDI input is selected and images available for the

MIX mode are input.

●

When the CAMERA ASSIST button is pressed while “MARKER” is

displayed, “MARKER” disappears and the CAMERA ASSIST MENU appears.

Press the button to select an item,

and then the button to proceed to the next screen.

●

For some items, adjustments will be made by pressing .

Press the CAMERA ASSIST button to finish the menu operation.

●

Alternetively, press the MENU button to close the menu screen.

CAMERA ASSIST MENU

RIG SETTING

Depending on the stereo camera rig condition, configure the horizontal flip/vertical flip/180-degree rotation settings of an image.

●

The settings are retained even when the CAMERA ASSIST MENU closes.

Half mirror

Parallel twin-flex

Setting value

Content

OFF

Does not rotate or flip the image

R-H-MIRROR

Horizontally flips images input into the SDI IN 2/R terminal

R-V-MIRROR

Vertically flips images input into the SDI IN 2/R terminal

L-H-MIRROR

Horizontally flips images input into the SDI IN 1/L terminal

L-V-MIRROR

Vertically flips images input into the SDI IN 1/L terminal

R-ROTATION

Rotates images input into the SDI IN 2/R terminal by 180 degrees

L-ROTATION

Rotates images input into the SDI IN 1/L terminal by 180 degrees

Vertical flip and 180-degree rotation delay the image by 2 frames. The other image will also be delayed and synchronized.

CAMERA ASSIST MENU

Half of the image is flipped horizontally.

●

Select “R-H-MIRROR.”

Half of the image is flipped vertically.

●

Select “R-V-MIRROR.”

Half of the image is rotated 180 degrees.

●

Select “R-ROTATION.”

DT3D24G1_EN.indb 14

11.1.25 0:53:49 PM