JVC GET0602-001A ユーザーズマニュアル

52

What appears to be trouble is not always serious. Check the following points before calling a service center.
•  For operations with the external components, refer also to the instructions supplied with the adapters used for the 

connections (as well as the instructions supplied with the external components).

•  Messages (enclosed in “  ”) in the tables below are shown in the language selected on <Language>. ( 

 13) 

Messages described here are in the language of this manual.

•  No sound comes out of the speakers. •  Adjust the volume to the optimum level.

•  Check the cords and connections.

•  The screen is not clear and legible.

Sunshine from the windshield may cause this symptom.
Adjust <Bright>. ( 

 12)

•  “Position Error Push Open Key” 

appears on the screen.

The monitor panel angle has been forcibly adjusted, or its 
adjustment has been interrupted while opening or closing. 
Press [OPEN/TILT].

•  “Mecha Error Push Reset” appears on 

the screen, and the panel does not 
move.

Reset the unit. ( 

 3)

•  “No Signal” appears.

•  Change the source.
•  Start the playback on the external component connected to 

VIDEO IN jack.

•  Check the cords and connections.
•  Signal input is too weak.

•  The buttons on the monitor panel do 

not work.

When the monitor panel is open, only VOL +/– and 

 

work. The other buttons do not function.

•  The unit does not work at all.

Reset the unit. ( 

 3)

•  The touch panel does not respond 

properly.

•   <Illumination> function does not 

work properly.

•  Keep your hands and the touch panel clean and dry.
•  Eliminate static electricity and do not place magnetic items 

near the unit.

•   Leave the unit until the temperature becomes stable in the 

car.

•   A rubber mat on the floor may cause this symptom. In this 

case, do not use the rubber mat.

•  SSM automatic presetting does not 

work.

Store stations manually. ( 

 21)

•  Static noise while listening to the 

radio.

Connect the antenna firmly.

EN52-59_KW-AVX726_001A_3.indd   52

EN52-59_KW-AVX726_001A_3.indd   52

12/10/08   11:34:01 AM

12/10/08   11:34:01 AM