JVC GET0602-001A ユーザーズマニュアル

54

•  Noise is generated.

The track played back is not a playable file format. Skip to another 
file. 

•  Tracks cannot play back as you 

have intended them to play.

Playback order may differ from the one played back using other 
players.

•  “Now Reading...” keeps flashing 

on the screen.

•  Readout time varies depending on the USB device.
•  Do not use too many hierarchy and folders.
•  Turn off the power then on again.

•  “Cannot play this device Check the 

device” appears on the screen.

No tracks are stored. Copy tracks to the USB device.

•  Correct characters are not 

displayed (e.g. album name).

For available characters, 

 48.

•  While playing a track, sound is 

sometimes interrupted.

The tracks are not properly copied into the USB device. Copy tracks 
again, and try again.

•  Bluetooth device does not detect 

the unit.

This unit can be connected with one Bluetooth cellular phone and 
one Bluetooth audio player at a time.
While connected to a device, this unit cannot be detected from 
another device. Disconnect currently connected device and search 
again.

•  The unit does not detect the 

Bluetooth device.

•  Check the Bluetooth setting of the device.
•  Search from the Bluetooth device.

•  The unit does not make pairing 

with the Bluetooth device.

•  Enter the same PIN code for both the unit and target device. If 

the PIN code of the device is not indicated on its  instructions, 
try “0000” or “1234.”

•  Select the device name from <Special Device>, then try to 

connect again. ( 

 25)

•  Echo or noise occurs.

Adjust the microphone unit (supplied with Bluetooth Adapter) 
position.

•  Phone sound quality is poor.

•  Reduce the distance between the unit and the Bluetooth 

cellular phone.

•  Move the car to place where you can get a better signal reception.

•  The sound is interrupted or 

skipped while using a Bluetooth 
audio player.

•  Reduce the distance between the unit and the Bluetooth audio 

player.

•  Disconnect the device connected for “Bluetooth PHONE.”
•  Turn off, then turn on the unit.
•  (When the sound is not yet restored,) connect the player again.

•  “NEW DEVICE” cannot be selected 

for “Bluetooth AUDIO.”

Bluetooth audio player is already connected. To select “NEW 
DEVICE,” disconnect it. ( 

 25)

•  The connected audio player 

cannot be controlled.

Check whether the connected audio player supports AVRCP (Audio 
Video Remote Control Profile).

EN52-59_KW-AVX726_001A_5.indd   54

EN52-59_KW-AVX726_001A_5.indd   54

12/16/08   1:05:43 PM

12/16/08   1:05:43 PM