Tascam MD-CD1MKIII ユーザーズマニュアル

TASCAM MD-CD1MKIII

Turning the Auto Ready function on and off
Press the AUTO READY button on the remote control to

turn the function of display master on and off.
You can also use the

A_READY

? option on the PLAY

sub-menu of the MD menu or CD menu to turn the Auto

Ready function on and off for each deck. (Default position:

OFF)
When the Auto Ready function is on,

A.READY

is lit on

the display.
Even when the power is turned off, the Auto Ready setting

is maintained.

Repeat playback

Press the REPEAT button on the remote control to turn

on the Repeat mode. In this mode, all the tracks on the

disc are played continuously. During playback, if the

Repeat mode is turned on, playback continues as before,

and when the last track finishes, playback resumes from

the first track. If Repeat mode is turned on when the deck

is stopped, press the PLAY button to begin operation.
You can also use the

REPEAT?

option in the PLAY sub-

menu of the MD and CD menus to turn the Repeat mode

on and off for each deck.
Combining the Repeat mode with the Program, Single-

track playback and Random playback functions will

enable Program Repeat, Single-track Repeat and Random

Repeat operations, respectively.

A to B repeat playback

If a specific portion between two points on the disc is

specified, that portion can be played back repeatedly.
1 During playback, press the A-B REPEAT button on

the remote control at the beginning of the desired

portion on the disc.

A-

flashes on the display.

2 At the end of the desired portion on the disc, press

the A-B REPEAT button on the remote control

again.

REPEAT

and

A-B

are lit up on the display, and the

desired A-B section will be played repeatedly.

To cancel A-B Repeat mode and resume normal

playback
Press the A-B REPEAT button once more.
When the STOP button is pressed, the specified A-B

section is cancelled.

NOTE

A-B repeat playback does not function for two different

•

tracks of a CD.
A-B repeat playback does not function for data CDs.

•

Continuous CD and MD playback

With this function, when one deck finishes, the other deck

begins play.
1 Turn on the CONT PLAY switch on the front panel.
2 Play a CD or MD.

When the disc finishes playback, the disc in the other

deck begins playing automatically.
When that disc finishes, the first disc is played again,

and the playback cycle continues.

NOTE

During Continuous Play, the deck currently in playback

•

automatically becomes the display master.
When the Repeat Mode is turned on, Repeat playback

•

is performed instead of continuous playback. That is,

Repeat Mode has priority over the Continuous Play

function.

To cancel Continuous Play operation, press the

STOP button.

Timer Playback

By using an external timer, you can set the MD-CD1MKIII

to play the loaded disc automatically when the unit is

turned on by the timer.
1 First, plug the power cord of the MD-CD1MKIII into

the power outlet of the timer.

2 Load a CD or an MD into the unit.
3 Use the

TIMER PLAY?

option on the PLAY sub-

menu of the MD or CD menu to turn the timer

function on for the desired deck.
When Timer Play has been turned on, the timer icon

lights up in the display.

4 Set the timer to the desired time. Consult the

timer’s operation manual for details.
At the set time, the power to the MD-CD1MKIII will be

turned on, and playback will automatically begin.

NOTE

Only one deck can be selected for timer playback. This

deck will become the display master during Timer Play

operation.

7 – CD and MD Playback