Tascam MD-CD1MKIII ユーザーズマニュアル

the track for deletion. 
The track number will be shown in the display.

Right after STOP, if the DEL/CLR button is pressed, the 

last track programmed will be deleted.

wish to add a track. 
The track number should be shown on the display.
Example: 
To add a new 3rd track (between 2nd and 3rd), display 

the 3rd track (“3p”) of the program.

Right after STOP, if the number of the track to be 

• 

added is input, and the ENT/YES button on the remote 

control is pressed, the track will be added to the end of 

the program. 
To add a track to the program by front panel operation, 

• 

use the MULTI JOG dial to select the track number, 

then press the dial.

Insert the CD or MD for which you want to erase a 

program into the deck.
1  Set the playback mode to Program.
2  Select “CLEAR PROG?” from the CD or MD menu.

Sure?

 appears.

If the playback mode is not Program, 

Can't Sel!

 

appears and you cannot select the option.

the ENT/YES key on the remote control.
The program is erased. When the erasing is complete, 

Complete

 appears.

The program is also erased if all tracks in the program are 

erased using the DEL/CLR button.

With an MD, if the Group playback mode is on, 

• 

programs that include more than one group cannot be 

created.
With data CDs, if the Directory playback mode is on, 

• 

programs that include more than one directory cannot 

be created.
The same track may be repeated in a program.

• 

When 99 CD tracks (or 25 MD tracks) are entered into a 

• 

program, if you attempt to add a track, 

PGM Full!

 

will be displayed, and no more tracks can be added.

Programs of up to 100 discs including CD and MD can 

• 

be retained.
For data CD, a single program uses double the usual 

• 

capacity, so the maximum number retainable will be 

lower.
If a created program exceeds the capacity, other 

• 

programs will be automatically erased starting from 

the oldest.
Programs on the currently inserted disc can be erased 

• 

using the menu.
CDs are distinguished by the total number of tracks (or 

• 

files) and total recording time (total capacity in the case 

of data CD).
MDs are distinguished by the total number of tracks 

• 

and recorded time.
Discs with the same total number of tracks and the 

• 

same total recording time (total capacity in the case of 

data CD) are regarded as identical.

In this mode, the deck will play back all the tracks on 

the disc in completely random order, regardless of track 

number.
1  During stop mode, press the P. MODE button on 

RANDOM

You can also use the 

PLAY MODE?

 option in the PLAY 

sub-menu of the MD and CD menus to set the Random 

Playback mode.
2  Press the PLAY button.

Random playback starts. Playback stops when all the 

tracks have been played once.

Even when the power is turned off, the deck will remain in 

RANDOM mode.