Euro-Pro UV627 ユーザーズマニュアル

ページ / 6
Model UV627
7.2 Volt DC
Care and Maintenance
To improve the  performance and life of your unit, we recommend you do the 
following:
1. Once a month clean the unit with a dry cloth, including the chamber which the dust 
container fits into. Remove any hair, fiber or other materials that may have built up in 
the chamber, on the rotating brush or edging tool.
2. Don’t use abrasive materials to clean the sweeper. Do not immerse the unit in water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces .
5. Don’t pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.       
TROUBLESHOOTING GUIDE 
PROBLEM 
POSSIBLE REASON 
     POSSIBLE SOLUTION 
SWEEPER WILL NOT 
OPERATE 
1. Batteries 
discharged. 
2.  No power in electrical 
outlet supplying charging 
adapter. 
3.  Unit needs servicing. 
1. Charge 
unit. 
2. Check 
fuse 
or 
breaker. 
Replace fuse/reset breaker. 
3.  Call Customer Service. 
SWEEPER  WILL NOT 
PICK-UP  
1.  Dust container is full. 
2.  Unit needs recharging. 
1.  Empty dust container.  
2. Charge 
unit. 
DUST ESCAPING 
FROM SWEEPER 
1.  Dust container is full. 
1.  Empty dust container. 
ROTATING BRUSH 
WILL NOT PICK UP 
1. Unit 
clogged. 
2.  Dust container is full. 
1. Check 
for 
excessive 
material 
on brush or in bottom of 
sweeper. Remove obstruction 
from brushes and/or sweeper. 
2.  Empty and clean dust 
container. 
SWEEPER WILL NOT 
CHARGE 
1.  Electrical outlet not 
working 
2. Charging 
Adapter 
 
not 
working 
3.  Batteries no longer 
functioning 
1.  Check to ensure outlet is  
        working properly. (Easily      
        checked by plugging in   
        another appliance. 
2. Replace 
charging 
adapter 
3.  See battery disposal pg. 8. 
 
STORING THE CORDLESS SWEEPER
Your cordless sweeper may be stored by using the slot on the back of the upper 
handle and hanging it from a screw secured to a wall or other vertical surface. Use 
a #6 flat or pan head screw with the appropriate hardware for the surface that the 
sweeper will be mounted on, (i.e. gyproc). Allow the screw head to extend a 
approximately 3/16" from the mounting surface. Always empty your sweeper before 
hanging up for storage.
11. Charging Adapter 
(TechWorld AD-1215-UL8
rated output DC 12V, 150mA)
12. Charging stand
13. Lower Handle
14. Upper Handle
15. Extension tubes
16. Charging Jack (Main Unit)
17. Charging Jack (Charging 
Stand)
1.
Sweeper Power Head
2.
On / Off Switch
3.
Speed Control
4.
Charging Light Indicator
5.
Speed Indicator Lights
6.
Rotating Brush
7.
Brush Cover
8.
Edging Tool
9.
Gear Box
10. Dust Container
NOTE:
Cordless Sweeper Model UV627 is shipped with the 
batteries uncharged.  Charging of the unit for 20 hours 
prior to first use is required.
9
2