Woods Equipment CZ2461K ユーザーズマニュアル

1.   Remove acorn nuts 1, plastic washers 2, arm 

rest 3 and second set of plastic washers 4.

2.   Adjust carriage bolts 5 to desired height  A, B, or 

C by pushingg on the carriage bolts 5 until they 
are free from the locking slot, adjusting them to 
the desired height and then pulling the carriage 
bolts 5 into the desired locking slot A, B, or C.  
Bolts must be placed into slots a like heights or 

arm rest will not fit.

3.   Re-assemble washers 2 & 4, arm rest 3, and 

acorn nuts 1 in reverse order from disassembly.   
Hold carriage bolts 5 in lockting slots while tight-
ening acorn nuts 1 to prevent them from falling 
out of the locking slots.  Tighten nuts 1 until de-
sired resistance in arm rest rotation is acheived.

A A

B

B

C C

1

1

2

4

3

2

4

5

5

The seat plate allows from some seat adjustment
either forward or backward.

1.  Flip seat up.

2.  Use holes 1 or 2 for seat adjustment. 

 

DO NOT USE  holes 3 or 4 due to space restric-
tions with the document tube.