Gardena 380 ユーザーズマニュアル

10

The cutting height can be set to any 
position between 12 mm and 42 mm.

1. Stand behind the cylinder mower 

with one foot on the roller

5

.

2. Release the two locking screws

6

and adjust to the correct height in 
the inspection window

7

.

3. Tighten the two locking screws

6

on both sides to the same

height.

The locking screws

6

must always be set to the same height on

both sides.

The mower may only be adjusted to a depth in which the lower
blade does not touch the ground when it is uneven.

v Clean cylinder mower before storage (see 5. Maintenance) and

store in a dry place.

The cylinder mower can be collapsed to save space by relea-
sing the wing nuts on the upright.

V

Always keep the cylinder mower clean and remove grass deposits.
Deposits affect the cutting result as well as discharge of grass 
clippings. Residual dirt and grass is easily removed immediately
after mowing.

1. Remove grass deposits with a brush and a cloth.

2. Oil the red cutting mechanism lightly with thin oil (e.g.

sprayed oil).

V

5

6

6

7