Gardena R70Li ユーザーズマニュアル

44 - English 

The lawn should not be cut too often to obtain the 
best mowing result. Consequently, it is important to 
limit the operating time using the timer function if the 
working area is less than the robotic lawnmower's 
working capacity. When the robotic lawnmower is 
allowed to mow too much, the lawn may appear 
flattened. Besides, the robotic lawnmower is 
subjected to unnecessary wear.

The timer function is also an ideal means to control 
which work hours the robotic lawnmower should not 
mow, for example, when the children are playing in 
the garden.

The factory setting is 07:00 - 23:00 (07:00-22:00 for 
GARDENA R40Li) and it allows mowing every day of 
the week. This is normally a suitable setting for a 700 
m

2

 working area (400 m

2

 for the GARDENA R40Li).

When setting the timer, calculate that the robotic 
lawnmower mows about 45 m

2

 per hour and day (30 

m

2

 for the GARDENA R40Li.)

R40Li).

•

Work hours 1
to set start and stop times for work hours 1. Enter 
each required time in hours and minutes and 
press OK to confirm the entered time.

•

Work hours 2:
to set start and stop times for work hours 2. Enter 
each required time in hours and minutes and 
press OK to confirm the entered time.

Work days
to select the days the robotic lawnmower must 
work. The robotic lawnmower will work during the 
days that are ticked off.

Reset timer
reset values to the factory settings.

To inactivate Work hours 1 or Work hours 2, enter the 
time 00:00 - 00:00 to reset the timer to --:-- - --:--. 

A clock symbol is displayed on the start page when the 
timer settings are set. The clock symbol is black when 
the robotic lawnmower is not allowed to mow due to a 
timer setting and it is white when the mower is allowed 
to mow.

The robotic lawnmower has an inbuilt standby period 
of about 8 hours a day (11 hours for the GARDENA 
R40Li). The robotic lawnmower is parked in the 
charging station during this period. See 4.2 Using the 
timer on page 35.