Gardena R70Li ユーザーズマニュアル

English - 45

The following operating settings are available via this 
selection in the main menu.

Guide width
to select the distance from the guide wire the 
robotic lawnmower is allowed to travel when it 
follows this to and from the charging station.

Remote start 1
to control the robotic lawnmower so that it can 
easier reach remote parts of the garden.

Remote start 2
to control the robotic lawnmower so that it can 
easier reach remote parts of the garden.

Test settings
to check the above settings.

Drive past wire
to set the distance over the boundary wire that 
the robotic lawnmower should travel before 
turning back.

For examples of garden settings, see 7. Garden 
examples.

The guide width is a measure of how far from the 
guide wire the robotic lawnmower is allowed to travel 
when it follows this to and from the charging station. 
The area beside the wire which the robotic 
lawnmower then uses is called the Corridor.

The robotic lawnmower has a default setting for 
medium wide corridors. To further reduce the risk of 
tracks forming, it is recommended to select a wide 
corridor in working areas where it is possible to do so.

Wide
In a wide corridor, the robotic lawnmower mows at 
more varied distances from the guide wire. 

A garden that is open and free of narrow passages 
should have a wide corridor to minimise the risk of 
tracks forming.