Gardena R70Li ユーザーズマニュアル

52 - English 

To indicate where the robotic lawnmower is at night in 
the working area, it is possible to allow the display to 
remain on when the robotic lawnmower is in operation.

1.

Select Backlight , R40Li in the menu and press 
OK.

2.

Select one of the following options:
Auto: The display is lit for 1 minute after the latest 
key press.
ON: The display is lit all the time when the robotic 
lawnmower operates. The display is not lit when 
the robotic lawnmower is stopped due for instance 
to a timer setting or possible disruption. 

One important function with the guide wire is the 
capacity to steer the robotic lawnmower to remote 
garden areas when required. This function is very 
useful in gardens where, for instance, the front and 
back are joined by a narrow passage where the 
charging station cannot be installed.

With this function activated, (any option other than 
Never is selected) the robotic lawnmower will follow 
the guide wire from the charging station to the point 
where the guide wire connects to the boundary wire. 
It begins to mow when it reaches this point. How 
often it must follow the guide wire from the charging 
station is selected as a proportion of the total number 
of times it leaves the charging station. At all other 
times, the robotic lawnmower leaves the charging 
station in the standard manner and starts to mow. 

The following five options can be selected; 

• Never (0%)

• Rarely (approx. 20%)

• Medium (approx. 50%)

• Often (approx. 80%) 

• Always (100%)

Select the percentage that corresponds to the size of 
the remote area relative to the total working area. If the 
remote area is for instance less than half of the total 
working area, then Rarely must be selected. If the 
remote area is for instance half of the total working 
area, Medium must be selected. Compare with the 
examples in 7. Garden examples on page 54. 

The default setting is Rarely.