Gardena R70Li ユーザーズマニュアル

50 - English 

This function means that the robotic lawnmower 
cannot be started after 30 days without first entering 
the correct PIN code. When the 30 days has passed 
the robotic lawnmower will continue to mow as normal, 
but the Enter PIN code message appears when the 
cover is opened. Enter your code again and press OK.

PIN request

This function means that the robotic lawnmower 
requests a PIN code when the main switch is set to 1 
and each time the cover is opened. The correct PIN 
code must be entered to use the robotic lawnmower. 

If the wrong PIN code is entered 5 times in succession 
the robotic lawnmower is blocked for a time. The 
blockage time is extended for every new incorrect 
attempt. 

Alarm

This function means that an alarm sounds if the PIN 
code is not entered within 10 seconds after the STOP 
button has been pressed or the robotic lawnmower has 
been lifted up for any reason. A ticking noise indicates 
that the PIN code must be entered to prevent triggering 
the alarm. The alarm can be turned off at any time by 
entering the correct PIN code.

The loop signal is randomly selected to create a 
unique link between the robotic lawnmower and the 
charging station. In rare cases, there may be a need 
to generate a new signal, for instance if two adjacent 
installations have a very similar signal.

•

Place the robotic lawnmower in the charging 
station.

•

Select New loop signal in the menu and 
press OK.