Gardena R70Li ユーザーズマニュアル

English - 59

Store the charging station and transformer indoors. 
The boundary wire and the guide wire can be left in the 
ground. The ends of the wires should be protected 
from damp by putting them in a container with grease 
for instance. 

Check if cleaning is needed, particularly the charging 
strips on both the robotic lawnmower and the charging 
station, on the first time of use. If the charging strips 
appear to be burnt or coated, clean them using a fine 
grade emery cloth. Check also that the robotic 
lawnmower’s time and date are correct.

It is important to keep the robotic lawnmower clean. 
A mower with large amounts of grass stuck to it will not 
cope as well with slopes. It is recommended to clean 
using a brush and a spray bottle with water.

1.

Set the main switch in position 0.

2.

Wear protective gloves.

3.

Lift the robotic lawnmower onto its side.

4.

Clean the blade disc and chassis using e.g. a 
dish brush.

At the same time, check that the blade disc 
rotates freely in relation to the foot guard. 

If long blades of grass or other objects find their 
way in, these may impede the blade disc. Even a 
slight braking effect leads to a higher 
consumption of energy and longer mowing 
times, and at worst will prevent the robotic 
lawnmower from being able to mow a large lawn. 

Clean the underside of the chassis. Brush or wipe 
with a damp cloth.

Clean around the front wheels and rear wheel as well 
as the rear wheel bracket.