Gardena R70Li ユーザーズマニュアル

60 - English 

Use a damp, soft sponge or cloth to clean the body. If 
the body is very dirty it may be necessary to use a 
soap solution or washing-up liquid.

Clean the charging station regularly from grass, 
leaves, twigs and other objects that may impede 
docking. 

Secure the machine during transport. It is important 
that the robotic lawnmower does not move when it is 
being transported, for instance, between lawns. 

To reduce the risk of damage to components in 
the robotic lawnmower, we recommend that all 
connections to the charging station are disconnected 
(power supply, boundary wire and guide wire) if there 
is a risk of a thunderstorm. 

There are three blades on the robotic lawnmower, 
which are screwed into the blade disc. All three 
blades and screws must be replaced at the same 
time to obtain a balanced mowing system.

Use GARDENA approved original blades only. 

To replace the blades:

1.

Set the main switch in position 0.

2.

Wear protective gloves.

3.

Turn the robotic lawnmower upside down.

4.

Rotate the skid plate so that its hole aligns with 
the screw for the blade. Applies to the R70Li 
only.

5.

Remove the screw. Use a straight slot or 
cross-tip screwdriver.

6.

Remove the blade and the screw.

7.

Screw on the new blade and the new screw.