Gardena R70Li ユーザーズマニュアル

64 - English 

The robotic lawnmower has got 
caught in something.

Free the robotic lawnmower and 
rectify the reason for the lack of drive. 
If it is due to wet grass, wait until the 
lawn has dried before using the 
robotic lawnmower.

The working area includes a steep 
slope.

Maximum guaranteed slope is 25%. 
Steeper slopes should be isolated. 
See 3.4 Installation of the boundary 
wire on page 21.

The guide wire is not laid at an angle 
on a slope.

If the guide wire is laid on a slope, it 
must be laid at an angle across the 
slope. See 3.6 Installation of the 
guide wire on page 28. 

The contact between the charging 
strips and contact strips may be poor 
and the robotic lawnmower has made 
a number of attempts to charge.

Put the robotic lawnmower in the 
charging station and check that the 
charging strips and contact strips 
make good contact.

An object is obstructing the robotic 
lawnmower.

Remove the object.

There is an object in the way of the 
robotic lawnmower preventing it from 
leaving the charging station.

Remove the object.

The robotic lawnmower is leaning too 
much or has turned over.

Turn the robotic lawnmower the right 
way up.

The robotic lawnmower is set in the 
MAN operating mode.

Place the robotic lawnmower in the 
charging station. This behaviour is 
normal and no action is required.

The timer setting prevents the robotic 
lawnmower from operating.

Change the timer settings. See 
6.3 Timer on page 44. 

The rest period is in progress. The 
robotic lawnmower must dock in the 
charging station for at least 8 hours a 
day (11 hours for the GARDENA 
R40Li).

This behaviour is normal and no 
action is required. See 4.2 Using the 
timer on page 35. 

The rest period is in progress. The 
robotic lawnmower must dock in the 
charging station for at least 8 hours a 
day (11 hours for the GARDENA 
R40Li).

This behaviour is normal and no 
action is required. See 4.2 Using the 
timer on page 35.