Husqvarna 96043002402 ユーザーズマニュアル

✓CHECKLIST

BEFORE YOU OPERATE  YOUR NEW  TRAC TOR, WE 

WISH TO ASSURE THAT YOU RECEIVE THE BEST PER-

 FOR MANCE AND SAT IS FAC TION FROM THIS QUALITY 

PROD UCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
✓  All assembly instructions have been completed.
✓  No remaining loose parts in carton.
✓  Battery is properly prepared and charged.   (Minimum 

1 hour at 6 amps).

✓  Seat is adjusted comfortably and tightened securely.
✓  All tires are properly inflated.  (For shipping purposes, 

the tires were overinflated at the factory).

✓  Be sure mower deck is properly leveled side-to-side/

front-to-rear for best cutting results.  (Tires must be 

properly inflated for leveling).

✓  Check mower and drive belts.  Be sure they are routed 

properly around pulleys and inside all belt keepers.

✓  Check wiring.  See that all con nec tions are still secure 

and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY 

EXTRA ATTENTION TO THE FOLLOWING IMPORTANT  

ITEMS:
✓  Engine oil is at proper level.
✓  Fuel tank is filled with fresh, clean, regular unleaded 

gasoline.

✓  Become familiar with all controls, their location and 

function.  Operate them before you start the engine.

✓  Be sure brake system is in safe operating condition.
✓  Be sure Operator Presence System and Reverse Op-

eration System (ROS) are working properly (See the 

Operation and Maintenance sections in this manual).

The tires on your tractor were overinflated at the factory 

for shipping purposes.  Correct tire pressure is important 

for best cutting performance.
•  Reduce tire pressure to PSI shown on tires.

For best cutting results, mower housing should be properly 

leveled.  See “TO LEVEL MOWER” in the Service and 

Adjustments section of this manual.

See the figures that are shown for replacing motion and 

mower blade drive belts in the Service and Adjustments 

sec tion of this manual.  Verify that the belts are routed 

cor rect ly.

After you learn how to operate your tractor, check to see that 

the brake is operating properly.  See “TO CHECK BRAKE” 

in the Service and Adjustments section of this manual.