Dimension One Spas Sarena Bay ユーザーズマニュアル

2003 Sarena Bay™ 

Export Owner’s Manual 

 

 

 

 

 
Every four months the top line of your Digital Display Window will read 
“CHANGE WATER” and the message “TURN POWER OFF, DRAIN & 
REFILL SPA...PUSH AND HOLD ICON BUTTON MORE THAN 3 
SECONDS TO RESET THIS MESSAGE” will scroll from right to left on the 
bottom line of the display.  
 
To reset this message, push and hold the Dimension One Spas 
ICON (logo)® Button located at the right hand side of the 
control for 3 seconds. 
 
When “CHANGE VISION CARTRIDGE” is displayed on the Digital Display 
Window, the system is telling you that it is time to replace it.  
 
To reset this message, push and hold the Dimension One Spas 
ICON (logo)® Button located at the right hand side of the 
control for 3 seconds. 
 

 

 

 

If you purchased a Vision cartridge subsequent to the initial start up 
of your hot tub, please follow the programming instructions for 
VISION as outlined in the next 

 section to set the 

six-month time frame. 

 

 

 
When “SPA CHECK UP” is displayed on the Digital Display Window, we 
recommend that you have your hot tub inspected by your dealer as a 
preventative maintenance measure.  
 
To reset this message, push and hold the Dimension One Spas 
ICON (logo)® Button located at the right hand side of the 
control for 3 seconds. 
 

 

 

The system can dismiss and reset the maintenance messages by pushing and holding the 
Dimension One Spas ICON (logo)®, on the right end of the control, for 3 seconds. If you 
press the Dimension One Spas ICON (logo)® for 5 seconds when there is no maintenance 
message, it will put the spa in the “Standby” mode. 

 

 

 
DO NOT ENTER THE WATER when “OVERHEAT” is displayed on 
the control system Digital Display Window because the hot tub is in a high 
temperature condition. If such a condition exists, check the water 
temperature with a certified thermometer and if it is above 40° C (≅104° F), 
remove the hot tub cover and allow the water to cool. If the problem recurs, 
turn off all power to the hot tub and contact your local Authorized 
Dimension One Spas Dealer, or authorized service center

. 

 

 

 
The overheat condition could be caused by excessive filtration. 
See the 

 section for more information. 

 

26