North Star M157477A ユーザーズマニュアル

ページ / 17
 
15
Oil fill tube 
 Maintenance
 
 
Engine Oil Change 
1.) Place a suitable container on the ground 
to catch the used oil, then remove the 
engine oil fill cap.  
2.) Tip the pressure washer on its side to 
pour the used oil out through the 
engine’s oil fill tube. 
3.) Please dispose of used oil in a manner 
that is compatible with the environment.  
We suggest you take used oil in a 
sealed container to your local recycling 
center or service station for reclamation.  
Do not throw it in the trash, pour it on the 
ground, or dump it down the drain. 
4.) With the pressure washer in a level 
position, add oil to the engine. (see 
engine owner’s manual for type of oil 
and capacity)  
 
 
 
 
 
 
 
 
 
 
 Storage 
 
Long Term Storage 
Follow the engine owner’s manual for storing the 
engine. 
 
Winter Storage 
Protect your pump, hose, and gun from freezing. 
Items needed: 12” piece of garden hose or equivalent, 
funnel and RV antifreeze (approximately 6 oz.) 
1.) Follow the storage instructions listed above. 
2.) Disconnect spark plug cable.  Make sure the engine 
throttle lever is in the “stop” position. 
3.) Attach the garden hose with funnel to the water 
inlet (see illustration). 
4.) Pour RV antifreeze into the funnel; pull the engine 
recoil until antifreeze comes out of the water outlet. 
5.) Drain all water from the pressure hose.  Depress 
trigger on spray gun to drain all water out of the 
spray gun/lance.  
RV 
antifreeze 
Funnel
Hose 
Water inlet